The gear we install — and what it costs.
Two manufacturers we're factory-certified to install at the top tier, a luxury equipment showroom with real product photos, four system-replacement bundles priced end-to-end, six everyday services with published price ranges, and a custom written proposal for your exact home. No mystery pricing, no bait-and-switch, no "call for a quote" wall.
See the gear before you buy it
Trane XR / XL / XV studio gear plus Mitsubishi wall, floor, cassette, ducted, outdoor H2i, and intelli-HEAT dual-fuel context — the same visuals our technicians pull up on a tablet when a homeowner asks, “What will this actually look like?” Filter by brand, open a model, swipe the gallery, then compare tiers against the bundles below.
Indoor units — wall, floor, cassette & ducted
Browse the official Mitsubishi Electric indoor lineup the same way our Comfort Advisors do on a job walk. Pick a form factor, then book an evaluation to size the outdoor H2i or MXZ match for your home.
Prefer a walkthrough with photos from real Logan installs? Ask your Comfort Advisor — and use the equipment showroom above for Trane studio shots plus a live Mitsubishi outdoor array.
Mitsubishi Electric & Trane — at the highest factory-certified level
As a Mitsubishi Diamond Contractor and a Trane Comfort Specialist, Logan installs both brands at the top dealer tier — which unlocks extended registered warranties and factory-backed parts a non-certified installer simply can't offer.
Mitsubishi Electric Diamond Contractor
Mitsubishi's top-tier dealer accreditation
Room-by-room comfort for homes without ductwork, additions, finished basements, and problem rooms — installed at the highest factory-certified tier so equipment qualifies for the best registered warranties.
Product families we install
- M-Series
- Residential single-zone and multi-zone ductless heat pumps — wall-mounted, floor-mounted, ceiling cassette, or slim ducted heads.
- H2i® Hyper-Heat
- Cold-climate heat pumps that keep full heating capacity down into DMV single-digit temps — no auxiliary heat strip required.
- P-Series
- Light-commercial ductless for small offices, retail spaces, restaurants, and additions with commercial loads.
- MXZ multi-zone outdoor units
- One outdoor condenser paired with up to 8 different indoor heads — mix wall, floor, cassette, and ducted zones.
- intelli-HEAT® dual-fuel
- Pairs a Mitsubishi heat pump with a gas furnace so the home always uses the most efficient heat source for the outdoor temperature — Performance Plus / custom hybrid builds.
Trane Comfort Specialist
Trane's highest independent dealer standard
Whole-home comfort through existing ductwork — built for maximum durability and reliable performance through DMV heat waves and cold snaps. Trane's Comfort Specialist tier means factory-backed parts and registered warranty coverage.
Product families we install
- XV · Premier TruComfort™
- Variable-speed air conditioners (18 / 20 TruComfort™) — up to 18.1–23.6 SEER2, Trane Link™ communicating control, Quietest operation and tightest humidity control. Requires a Trane smart thermostat on 18/20 models.
- XL · Priority multi-speed
- 17 Multi-Speed outdoor units (optional WeatherGuard™ top) — up to 17.1–18.0 SEER2 with ComfortSeek™ that adjusts compressor speed to outdoor conditions. The top-tier outdoor silhouette most homeowners see after an XL install.
- XR · Choice single-stage
- 13 / 14 / 16 Single-Stage outdoor units — up to 13.4–17.0 SEER2. Reliable, code-compliant, value-priced whole-home cooling and heat-pump outdoor cabinets.
- TAM / TEM & furnaces
- Matched Trane air handlers and 80–97% AFUE gas furnaces — sized and pair-matched with the outdoor unit so the system actually performs to its rated SEER2.
Also serviced: Amana, American Standard, Aprilaire, Bosch, Bryant, Carrier, Coleman, Daikin, Goodman, Honeywell, Lennox, Rheem, Ruud, Tempstar, York, and more — Logan services and repairs all major residential and light-commercial HVAC brands, even the ones we don't feature above.
Four ways to replace a whole system
Every full system replacement lands in one of four tiers. Real ranges, real inclusions, real labor + manufacturer warranty coverage — the exact bundles a Logan Comfort Advisor walks through in the free in-home evaluation before writing your custom proposal.
Entry tier
Standard
$5,000 – $12,000
Best for landlords, budget-first replacements, or homes staying under five more years.
Equipment
- Trane XR / Choice single-stage AC or heat pump (13.4 – 14.3 SEER2 per TT_72-1208)
- Trane XR-series 80% AFUE gas furnace OR TEM / standard air handler
- Programmable non-communicating thermostat
Install & warranty
- Load-sized to your home (no lazy in-and-out swap)
- Nitrogen pressure test + deep-vacuum evacuation
- 1-year Logan labor warranty
- Trane registered manufacturer warranty — 10-year compressor, outdoor coil & functional parts (Choice lineup)
Most popular
Comfort
$12,000 – $22,000
Best for homeowners staying 5+ years who want quieter operation, better humidity control, and long-term energy savings.
Equipment
- Trane XL / Priority multi-speed AC or heat pump (up to 17.1 – 18.0 SEER2; optional WeatherGuard™ top)
- Trane XL / S-series 96% AFUE two-stage variable-speed gas furnace
- Smart Wi-Fi thermostat (Nexia / Ecobee / Honeywell)
- Media air-cleaner cabinet (MERV 11+)
Install & warranty
- ACCA Manual J load calculation (required in Montgomery County + Bethesda)
- Refrigerant-line replacement or full nitrogen brazing when swapping refrigerant type
- 2-year Logan labor warranty
- Trane registered manufacturer warranty — 12-year compressor + 10-year outdoor coil & parts (Priority lineup)
Variable-speed premium
Performance
$22,000 – $35,000
Best for homeowners who want the quietest operation, tightest humidity control, and highest efficiency — with the longest Trane labor coverage available.
Equipment
- Trane XV / Premier TruComfort™ variable-speed AC or heat pump (up to 18.1 – 23.6 SEER2)
- Trane XV / XC 97% AFUE modulating variable-speed gas furnace
- Trane Link™ / UX360 communicating smart thermostat (required on 18/20 TruComfort)
- Media air-cleaner cabinet or PureAir whole-home purifier
Install & warranty
- ACCA Manual J load calc + Manual D duct evaluation
- Nitrogen brazing + refrigerant-line replacement when swapping refrigerant type
- 10-year Logan labor warranty (Trane Comfort Specialist install)
- Trane registered manufacturer warranty — 12-year compressor + 10-year outdoor coil & parts (Premier lineup)
Top tier · Diamond Contractor
Performance Plus
$35,000 – $60,000
Best for larger homes, multi-zone comfort, additions and finished basements, teardown-to-mansion projects, and homeowners who want maximum rebate capture with the manufacturer's longest coverage.
Equipment
- Mitsubishi H2i multi-zone Hyper-Heat system (cold-climate heat pumps that keep full capacity into DMV single-digit temps) OR Trane XV all-variable dual-fuel system
- Zoning system with 2 – 4 dampers + communicating thermostat
- Whole-home air purifier (PureAir, REME, or UV-C) + whole-home humidifier
- Optional all-electric heat-pump-only configuration for rebate capture
Install & warranty
- Includes 1 year of Comfort Club membership (priority service + tune-ups)
- Diamond Contractor install — registers the equipment for Mitsubishi's longest residential coverage
- 12-year Logan labor warranty (Mitsubishi Diamond)
- Mitsubishi registered manufacturer warranty — 10-year parts + 12-year compressor
Actual pricing depends on your home's size and configuration, the equipment you pick, and where the outdoor unit / lines have to run. Your Logan written proposal itemizes everything.
Individual services with published price ranges
Not ready for a full system replacement? These are the everyday services we quote most often — real Logan pricing sheet ranges, not a starting-at teaser.
Mitsubishi Mini-Split Installation
$6,000 – $45,000
Single-zone or multi-zone Mitsubishi ductless system — wall, cassette, floor-mount, or ducted heads — installed to Diamond Contractor spec with a nitrogen pressure test, deep-vacuum evacuation, and full startup verification.
Included
- Indoor & outdoor Mitsubishi equipment
- Refrigerant line set, communication wiring & condensate piping
- Exterior Line-Hide where applicable
- Nitrogen pressure test, evacuation & manufacturer startup
Complete System Replacement
$5,000 – $50,000
Full replacement of residential heating and/or cooling equipment — gas furnaces, heat pumps, air conditioners, air handlers, coils, boilers, mini-splits, PTAC or package units — installed to manufacturer spec and code, with complete startup and system verification.
Included
- Removal & disposal of the existing equipment
- New equipment set, piped, vented, wired & controlled
- Startup, testing & operation verification
- Right-sized equipment sourced for your home, not a stock swap
AC Tune-Up
$250 – $550
Seasonal cooling maintenance visit for one residential AC or heat pump — designed to catch small issues before they become a mid-July no-cool call.
Included
- Thermostat calibration & operation check
- Voltage/amperage testing on compressor & fan motors
- Capacitor & contactor inspection and test
- Refrigerant pressures + temperature split verification
Furnace Maintenance
$250 – $550
Seasonal preventive maintenance visit for one residential gas furnace, focused on safe combustion, reliable ignition, and heat you can actually count on when the DMV finally goes cold.
Included
- Burner, ignitor & flame-sensor inspection
- Pressure switch & inducer motor check
- Combustion analysis (where equipped)
- Thermostat operation & heating cycle verification
Indoor Air Quality Test
$500 – $1,000
A whole-home evaluation of the HVAC-related conditions that shape the air you actually breathe — filtration, humidity, ventilation, and airborne contaminants — with straight-talk recommendations, not a sales pitch.
Included
- System operation & filter condition inspection
- Return air & airflow evaluation
- Accessible ductwork & equipment review
- Humidity, ventilation & contaminant screening
Thermostat Upgrade
$275 – $985
Professional replacement or upgrade to a new thermostat — standard, programmable, Wi-Fi, smart, or manufacturer-communicating — configured for your system and, when applicable, connected to your home Wi-Fi.
Included
- Safe removal of the existing thermostat
- Wiring verification (at the accessible point)
- New thermostat installation & basic configuration
- Operational test of heating, cooling, and fan calls
Factory-certified means longer coverage
A non-certified installer typically leaves you with the manufacturer's minimum warranty. Logan's Comfort Specialist and Diamond Contractor status unlocks longer registered manufacturer coverage — and lets us stand behind the labor with matching multi-year warranties.
Trane Comfort Specialist
Labor: 1 / 2 / 10 yr · Parts: 10 yr · Compressor: 10 – 12 yr
Labor coverage runs 1, 2, or 10 years depending on the Trane equipment you select — the 10-year band is unlocked because Logan is a Trane Comfort Specialist. Manufacturer parts are 10 years across the line; compressor coverage is 10 years on most models and 12 years on select premium units.
Mitsubishi Diamond Contractor
Labor: 1 / 2 / 12 yr · Parts: 10 yr · Compressor: 12 yr
Labor coverage runs 1, 2, or 12 years depending on the Mitsubishi equipment you select — the 12-year band is unlocked because Logan is a Diamond Contractor. Every Mitsubishi install carries Mitsubishi's longest residential registered manufacturer coverage: 10-year parts and 12-year compressor.
Service call & labor rates
Our labor rate is $250/hour. Service call fees below are the trip-and-diagnosis charge to have a union-trained technician at your door — they cover the visit itself and are separate from any repair work quoted after the diagnosis. 10% member savings on installs and repairs (Comfort Club).
-
Residential service call
$95
Waived on approved repairs
-
Commercial service call
$370
Business hours
-
Residential emergency (non-member)
$250
After-hours & weekends
-
Commercial emergency (non-member)
$500
After-hours & weekends
Spread the cost — no-interest options on qualifying installs
Logan partners with Synchrony (apply through our dealer portal in minutes) and Wells Fargo to make high-efficiency equipment fit your monthly budget. Ask your Comfort Advisor to include financing options in your proposal.
The Logan proposal process
The ranges on this page are the honest bands. For your exact home, you get an itemized written proposal — not a napkin quote.
Free in-home evaluation
A Logan Comfort Advisor comes to your home, measures the load, inspects your ductwork or where new lines will run, and asks about the rooms that never feel right. This visit is free — no pressure, no hard sell.
Custom itemized proposal
We build your written proposal in-house — itemizing equipment, add-ons, labor and manufacturer warranties, financing, and any qualifying utility rebates. You receive a shareable proposal link so you can review every line at your own pace.
Compare tiers side-by-side
Your proposal shows the four Logan tiers for your exact home — Standard, Comfort, Performance, and Performance Plus — so you can see a Standard install next to a Comfort, Performance, or Performance Plus build, with the price differences called out clearly.
Approve, schedule, done right
Approve the tier you want inside the proposal, we schedule the install, and a union-trained crew handles everything from removal to startup — including permit pulling in Prince George's, Charles, Montgomery, DC, Fairfax, Alexandria, and Falls Church.
How do I see actual pricing for my home?
The ranges on this page are real. For your exact home, request a free in-home evaluation — we build a custom written proposal that itemizes equipment, add-ons, labor and manufacturer warranties, financing, and any qualifying utility rebates. You'll leave the meeting with the itemized quote in writing.
What's included in the written proposal?
Your proposal itemizes every piece of equipment we recommend, the labor warranty tier, the registered manufacturer parts + compressor coverage, any add-ons (air purifier, humidifier, zoning), financing terms if you want them, and any qualifying utility rebates. You get a shareable link so you can review it on your own time — nothing verbal, nothing lost in translation.
Do I have to pay for the estimate?
No. Free written estimates on installs and replacements are our standard. You only pay a service-call fee when you need a diagnostic visit on an existing system that's broken — and that fee is waived on any approved repair.
Do you offer financing?
Yes — Logan partners with Synchrony (apply directly through our dealer portal) and Wells Fargo. No-interest options are available on qualifying installs, subject to approval. Ask your Comfort Advisor to include financing options in your proposal.
Ready to move? Book a visit or call us.
The live ServiceTitan scheduler is available from the Book Online button in the site header on every page — including this one. Or call 240-899-8305 and a real dispatcher will answer. Free written estimates on installs and replacements.
You Know Our Slogan —
You Better Call Logan.
Comfort you can trust, installed right the first time. Same-day appointments and 24/7 emergency service across the DMV.